VIA Technologies, Inc.
Welcome to a World of Digital Brilliance!
 
  home  >  products  >  networking  >  rhine  >  vt6107   Print pagePrint page E-mail pageE-mail page

VIA Networking Products

» Home

VIA Rhine NIC

» Home
» Rhine VT6105M
» Rhine VT6106S/L
» Rhine VT6106H
» Rhine VT6107

Download Center

» Networking Downloads

Support

» VIA Arena

VIA Rhine VT6107 PCI Fast Ethernet Controller

This product is available fully ROHS-compliant.


The VIA Rhine VT6107 Fast Ethernet controller is a cutting edge, feature-rich, single-ASIC solution for LAN-on-motherboard applications. By optimizing the throughput between the NIC and the PCI bus, the VT6107 drastically reduces CPU utilization and allows a transfer rate of up to 200 Mbps in full-duplex. The VT6107 supports advanced power management features for low power consumption, including Wake on LAN (WOL), and is implemented in a low power CMOS process.


Key Features

» Pin- to -pin compatible with the VIA Networking Technologies Velocity VT6122 Gigabit Ethernet Controller.
» Single-chip Fast Ethernet network interface controller (NIC) for PCI bus
  - PCI 2.2 specification compliant
  - 10/100 Mbps Ethernet communications
» High Performance PCI Mastering Structure
  - On-chip bus master DMA
  - Transmit data buffer byte-alignment for low CPU utilization
  - Dynamic transmit packet auto-queuing for back-to-back transmission
  - Programmable activity polling intervals for description DMA
  - Programmable DMA arbitration priority to minimize overflow and underflow conditions
  - Supports PCI enhanced commands
» Provides Standard 10Base-T/ 100Base-TX/ PHY Layer and Transceiver
  - Supports 10Base-T/100Base-TX with CAT5 UTP and STP
  - 10/100 Mbps N-way auto-negotiation
  - 10/100 Mbps full/half duplex operation
  - Supports MDI/MDIX auto-crossover
  - Automatic power saving for disconnected cables
  - Programmable LED outputs for link, activity, duplex, speed, and collision
» Direct Programming EEPROM and Virtual EEPROM
  - Supports loading after power-up
  - Dynamic auto-reload
  - Dynamic direct programming for manufacturing
  - Supports loading from Virtual EEPROM
» emBoot PXE Certification
» Power management
  - Supports PCI Bus Power Management Interface Specification 1.0/1.1
  - Supports Advanced Configuration and Power Interface (ACPI) Specification 2.0
  - Supports Network Device Class Power Management Specification 1.0a
  - Wake-up event support link change / magic packets / unicast physical address / MS-defined pattern match
»Flow Control
  - Supports IEEE 802.3X for full duplex
  - Multiple pause frame Xon/Xoff
» Dual-power design: 3.3V I/O Power and 2.5V Core Power
» 128-pin, 14 x 14 mm, EP-LQFP package


Resources
Product brochures download
VIA VT6107 image kit

Tech Support

If you should have problems or questions setting up or running your VIA product, we offer comprehensive technical support at our portal, VIA Arena. Here you can find the latest device drivers, as well as helpful forums to discuss and solve your problems.


Contact Us

Click here for more information


  Home  »  Trademark Information   »  Feedback   »  Sitemap Copyright©2008 VIA Technologies, Inc.